Orica Powder Coatings offer a large range of powder coating chemistries and colours. The four colour cards (downloadable below) categorise the chemistries broadly into their end use. However, we can make to order to match your requirements.

Disclaimer: Due to variations in computer monitor screens and colour printers, the colours represented are indicative only.

Duralloy® Colour Guide

The Duralloy Colour Guide illustrates 70 Duralloy colours. Whilst Duralloy was formulated with aluminium joinery as the targeted substrate, Duralloy is equally at home in industrial applications over a variety of substrates.

The Duratec® Colour Card

Duratec illustrates 16 colours.

The Pacificgold® Industrial Colour Card

72 colours are illustrated on the Pacificgold Industrial colour card. A sun fade index of 1 denotes a UV stable colour with very low fade potential. A sun fade index of 2 denotes a colour that will fade on exterior exposure. The degree of fade varies from colour to colour with generally the brighter colours showing obvious fade with the first 2 years. A sun fade index of 3 indicates that this coating should not be considered in an exterior environment. In general, the Pacificgold colour range has been designed for industrial purposes, however, some of the colour range would be equally at home on Aluminium Extrusion.

Trimatrx® Colour Card

As with conventional powder coating, the colour range for Trimatrx is enormous. Derived from market trends, this eclectic colour selection is ideal for either subtle subdued environments or where a bold statement is desired. With a spectrum of colours available, let your imagination run free. At this stage, Trimatrx is predominantly produced in a low gloss / matt finish..